Let’s be honest not everyone enjoys building furniture. The idea of laying out bolts, reading tiny diagrams, and figuring out which part goes where can be a bit much. But building your new bed does not need to be stressful.
Whether you have ordered a classic frame, a storage divan, or an ottoman from FunkyBedz, this guide will give you simple tips to make assembly quicker, smoother, and much less frustrating.
1. Unpack Everything First
Before you start, lay out all the parts and hardware on a clean floor. Group the fixings and double-check you have everything listed in the instructions.
Pro tip:
Lay a sheet or rug down to avoid scratching the bed or your floor.
2. Read the Instructions All the Way Through
It sounds obvious, but most people dive in and get stuck halfway. Reading the full instructions first gives you a clear picture of what to expect and which steps need an extra pair of hands.
FunkyBedz instructions are designed to be simple, but take a minute to scan them before starting.
3. Have the Right Tools Ready
Most beds come with an Allen key, but having a few extra tools nearby makes life easier:
- Phillips screwdriver
- Flathead screwdriver
- Spanner (if needed)
- Scissors or knife for packaging
Keep them all within reach so you are not hunting around mid-build.
4. Build It Where You Want It
Bed frames are large and awkward to move once built. If you can, assemble the bed in the room where it will stay. It will save you struggling through doorways later.
If working in a small space, build the headboard and sides first, then finish the rest in place.
5. Do Not Over-Tighten Too Early
When attaching the headboard, footboard, and side rails, leave bolts slightly loose at first. This helps with alignment. Once everything is connected and square, go back and tighten them fully.
This trick avoids gaps, strain on fixings, and the dreaded “wobble”.
6. Get Help for the Heavy Lifting
Many beds especially ottoman or Super King sizes are heavy. If possible, have someone nearby to help:
- Holding parts in place
- Lifting the mattress platform
- Fixing the gas pistons on ottoman beds
Two people make the job faster and safer.
7. Check Your Work as You Go
After each stage, give things a gentle shake. If something feels loose, go back and tighten. It is much easier to fix problems as you build rather than at the end.
8. Save the Instructions and Tools
Once your bed is built, pop the instructions and Allen key into a labelled bag or drawer. If you ever need to move house or tighten a bolt later, you will be glad you kept them.
Final Thoughts
You do not need to be a DIY expert to assemble a FunkyBedz frame. With the right prep and a bit of patience, it is a simple process. And if you really cannot face it, let us know as we offer an assembly service in many areas.
❓ Frequently Asked Questions
How long does it take to build a bed frame?
Most standard frames take 30 to 60 minutes. Ottomans may take a bit longer due to the lift mechanism.
Can one person build a bed alone?
Yes for smaller beds, but it is much easier and safer with two people — especially for heavy or awkward parts.
What tools do I need?
An Allen key is included, but a screwdriver and spanner can help. Scissors or a knife for packaging is useful too.
What if something is missing?
Contact us at sales@funkybedz.com and we will send any missing parts right away.
Do you offer assembly?
Yes. We offer assembly in many UK areas for an added fee. Contact us for availability and pricing.
