Just received your new bed frame and not sure where to start? You are not alone. Assembling a bed can feel like a big job, but with a bit of patience and the right steps, it is easier than you think.
At FunkyBedz, we want to make your setup stress-free. This guide walks you through how to put your bed frame together, using clear, simple instructions. We have also included a full video tutorial to show you exactly what to do.
🎥 Watch the Video First
Before you dive in, we recommend watching this full assembly video:
👉 Click here to watch the video on YouTube
👉 Download the PDF of Bed Assembly
This will give you a visual overview of the steps. Then follow the written guide below to help you along the way.
Tools You Will Need
You will rquire a 13mm Spanner
Step-by-Step Bed Frame Assembly
1. Unbox and Lay Out the Parts
Start by unpacking all the pieces. Lay them flat on the floor and check the parts list.
Make sure nothing is missing and do not remove any packaging until you are ready to use it.
Tip: Place the parts on a soft surface like a rug to avoid scratches.
2. Attach the Headboard to the Side Rails
Position the headboard upright against a wall. Attach the side rails to the headboard by sliding the sidrails to the brackets on the headboard.Â
Make sure both rails are level before fully tightening.
3. Connect the Footboard
Now attach the footboard to the opposite ends of the side rails. This completes the outer frame. Again, align the corners and tighten each bolt gradually.
Check the structure is square and balanced before moving on.
4. Add the Centre Support (If Included)
Most Double, King, and Super King beds will have a centre support bar. This often slots into place across the middle of the bed and may have one or more legs underneath for extra support.
Screw these in securely so the middle of the bed stays firm under weight.
5. Secure the Slats or Platform Base
Lay your slats across the bed frame, spacing them evenly. Some designs have clips or a central spine for support.
If your bed has a platform top (solid base), it may come in one or two parts. These usually slot or screw into place.
Make sure all slats or boards are stable before placing your mattress on top.
Final Checks
- Tighten all bolts fully but avoid over-tightening
- Press down gently on each part of the frame to check for movement
- Ensure everything feels solid and secure
- Clean up packaging and place your mattress carefully
You are ready to enjoy your new bed.
Need Help?
If you are stuck at any point, rewatch the video or get in touch with us (video is of an Ottoman Storage Bed). We are always happy to guide you through the steps or send you a digital manual.
âť“ Frequently Asked Questions
How long does it take to assemble a bed frame?
Most FunkyBedz frames take 30 to 60 minutes to assemble, depending on the size and whether you have help.
Can I build the bed alone?
Yes, though having someone to hold parts in place can make it quicker and easier.
What if I am missing a part?
Contact us right away and we will send out any missing components without delay.
Do I need power tools?
No. All our beds are designed for easy hand assembly. An Allen key and screwdriver are usually all you need.
Can FunkyBedz assemble the bed for me?
Yes. Assembly services are available in certain areas. Please contact us for a quote.
